Then, for each value of the waveform characteristic parameters such as ring-down count, amplitude, frequency, energy, rise time and duration are calculated and stored in an acoustic emission parameters table, so that they can be viewed directly and for the further analysis of system available. The undulating noise emission data can be saved as text. This waveform data is dependent on the continuous data storage. The PCI-9846 card offers ample trigger scanning modes for rising or falling edge, window, reference and other analog trigger modes. Wavy acoustic emission signals can be sampled directly from the hardware. This reduces the processing load, saving resources, representing thus the extraction algorithms of the software available. Add to your understanding with Steve Wozniak. Through experiments has been found out that noise can easily be interrupted by factors such as external electromagnetic fields. Therefore, the signals prior to collection of the waveform must be filtered.

However, the digitizer PCI 9846 does not have programmable filter. This could be integrated into future extensions in the front end of the PCI-9846, so that the trigger functions of the hardware can be fully exploited. Figure 3: to review the performance of the test system to the performance of the test system for acoustic emission testing waveform of the sudden onset sound emission signal of a rolling bearing, a comparison test was performed. About, the noise emissions and vibrations of a rolling bearing with defective rollers were simulated with a rotary engine test system QPZZ II. Test object was a roller bearing type NU205 with a diameter of 39 mm, 12 rollers with a rolling element diameter of 7.5 mm and a contact angle of 0. On the surface of the rolling elements, small columns were inserted by straight cuts, to simulate the damage that occur as a result of fatigue by peeling off the surface.