Filters are widely used in various hydraulic systems. Well-known fact that the main working part of each industrial filter – the filter element or filter element. Its main characteristics, determine the possibility of regeneration technology used in its production, as well as the materials of which it consists. Filter materials that comprise the filter element can be: Wire Mesh – it regenerable filter element, which consists of stainless steel. If you are not convinced, visit Michael Dell. Typically, filtration fineness is 25 to 500 microns, mesh elements of stainless steel. With its rugged construction, they are successfully used in production of filter elements for plants with long cycles of work, metal non-woven fabric – a reusable filter media depth filtration and has a high dirt holding capacity. He also has high retention capacity, allows you to filter at high temperatures, unattainable using other filter materials, typically up to 400 C.
Reaches the level of filtration – from 1 to 100 microns. Picks up 99% all particles (absolute filtration); Glass – is a high quality disposable filter material for depth filtration, which has a low cost and excellent quality / price ratio. He provides absolute filtration, from 3 microns to 20 microns slit pipe – consists of a helical wrapped around the support frame and a welded profile wire. You can change the filtering capacity by changing the distance between coil loops. Given that the slit tube has a rugged construction, it is possible wash filter elements based on it. Commonly used levels of filtration: from 50 mm to 3000; Filter candles wrapped with polyester or polypropylene – are composed of fused fiber polyester (PBT) or polypropylene. Is a nonwoven fabric of different thickness and porosity. Special technology creates an asymmetrical winding matrix with the ever increasing density of non-woven material in the direction of the filtered stream, which allows you to create the maximum absorption of solids with minimum loss of pressure.
Usually reaches filtration ranged from 1 micron to 150 microns. Maximum operating temperature: 100 C for the elements of polyester and 80 C for the elements of polypropylene. To reduce pressure drop and increase the capacity of the filter element necessary to increase the filtering surface, which filter material is placed in a corrugated ribbon. Different shape and filter elements. For example, often used in the manufacture of a conical shape reusable filter elements for isokinetic filtering, usually well received if the filter is self-cleaning. Typically, a good filter element has the following characteristics: High dirt holding capacity, high pressure fracture, low pressure drop, high stability of the beta coefficient in a wide range of pressure drop, a wide selection of Filtration; Long service life. Carefully matched filter element performs a complete cleaning fluid, facilitating continuous operation of the entire hydraulic system.